Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX

Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX
Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX
Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX

Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX
OBX Racing Sports offers an extensive range of high quality aftermarket automotive products for imports and domestic vehicles. OBX Racing Sports sets and maintain the industry’s high expectations by using applicable highest grade materials and latest machinery along with advanced cutting edge manufacturing technologies. OBX Racing Sports Stainless Steel Header (2pcs). Equal Length Header Design Mirror Polished Finish Made of 304-Grade Stainless Steel Primary Tube: 1.6″ OD Collector Outlet: 1 7/8″ OD Flange Thickness: 3/8 Runner Wall Thickness: 16 Gauge (1.5mm) Two welded o2 Bungs. Improve performance, efficiency, and horsepower CNC-machined flange for precision fitment Mandrel bent for fast smoother exhaust flow Dual T. Please arrange for someone to sign for the package(s). The merchandise must be unused, in the original packaging and in resalable condition. Any labor charges incurred for installation of products are non refundable. Some product(s) are for off-road or show car purposes only, may not be suitable for regular driving condition. These product(s) doesn’t carry DOT, SAE or CARB approval. Our company is not responsible for any misuse of the the product. OBX Racing Sports and the parts contained herein are not sponsored, affiliated, associated, licensed nor authorized or otherwise connected in any way with America Honda Motor Corporation, Inc the original equipment manufacturers shown on this page/website. Not legal for sale in California!!! For off-road competition/racing use only. This product is not intended to be installed on vehicles registered for highway use. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. All United States Military Bases, AA, AE, AP. The item “Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX” is in sale since Friday, April 26, 2019. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Systems”. The seller is “allmotorsports11″ and is located in Fremont, California. This item can be shipped worldwide.
  • Certification: None
  • Interchange Part Number: JBA Hooker Gibson Borla Stainless Works Corsa Kook
  • Material: Stainless Steel
  • Surface Finish: mirror polished
  • Manufacturer Part Number: 10-2701-2S1-3
  • Brand: OBX
  • Restricted States: California
  • Warranty: Yes

Stainless Steel Equal Length Header For Subaru 1998-05 Impreza EJ25 By OBX

Stainless Power 2015-2019 Mustang GT 1-7/8 Long Tubes Catted Aftermarket Exhaust

Stainless Power 2015-2019 Mustang GT 1-7/8 Long Tubes Catted Aftermarket Exhaust

Stainless Power 2015-2019 Mustang GT 1-7/8 Long Tubes Catted Aftermarket Exhaust
Stainless Power 1-7/8 Long Tube Headers with High Flow Catted Pipes #SM15H3CATLG. Tig welded 304 stainless steel headers with 3/8″ thick flanges and 3″ diameter slip fit collectors with merge spikes. This Stainless Power system is designed to work with Stainless Works 2015+ Mustang aftermarket connect exhausts , which include MBRP, Corsa and SW Factory Catbacks. Our Stainless Power headers are backed by a 24-Month guarantee on material and workmanship. Stainless Works introduces our new brand of value-line header and exhaust products made for the high-quality market, yet specially priced for the cost conscious consumer. Stainless Power products are designed by Stainless Works, and exclusively made and inspected to our exact specifications and made from the highest quality 304L Stainless Steel. Designed to fit MBRP and Corsa Catbacks. Also Fits Stainless Works Factory Connect Catback. 304 Stainless Steel Construction. CNC Mandrel Bends For Extreme Flow. Extra Thick 3/8 Laser-Cut Flanges. Install Ready: Includes O2 Extensions, Clamps, Bolts And RTV Silicone. 24-Month Guarantee On Material And Workmanship. 2018, 2017, 2016, 2015. Aftermarket Connect [To MBRP, Corsa, SW Factory Exhaust]. High Flow Catalytic Converter. Products designed by others including product where any material type, thickness, product shape, brackets, hangers, etc. Are defined by anyone other than Stainless Works. Racing applications of any kind. Damage resulting from abuse including backfire, excessive heat or unusual corrosive conditions. Product made from Aluminized Steel, Mild Steel, etc. The item “Stainless Power 2015-2019 Mustang GT 1-7/8 Long Tubes Catted Aftermarket Exhaust” is in sale since Wednesday, September 20, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “justboltonperformanceparts” and is located in Atlanta, Georgia. This item can be shipped worldwide.
  • Interchange Part Number: 2015-2017 Mustang GT
  • Surface Finish: 304 Stainless Steel
  • Manufacturer Part Number: SM15H3CATLG
  • Placement on Vehicle: Left
  • Brand: Stainless Works
  • Restricted States: California
  • Warranty: 2 Year

Stainless Power 2015-2019 Mustang GT 1-7/8 Long Tubes Catted Aftermarket Exhaust

Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4

Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4

Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4
Fitment and Product Information. Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4 Product Details. Stainless Power 2005-18 Hemi headers with 1-7/8″ primary tubes, 3″ off-road leads to connect to factory connection point. Designed for 2008-18 Dodge Challenger 5.7, 6.1, 6.2, 6.4L / 2006-18 Dodge Charger 6.1, 6.2, 6.4L / 2005-08 Dodge Magnum 6.1L / 2005-18 Chrysler 300 6.1, 6.4L. Model: 300C, Challenger, Charger, Magnum. Year: 2018, 2017, 2016, 2015, 2014, 2013, 2012, 2011, 2010, 2009, 2008, 2007, 2006, 2005. Engine: 5.7L, 6.1L, 6.2L, 6.4L. Lead Pipe Size: 3. Primary Tube Size: 1 7/8. Header Tube Length: Long. Emissions Control: Off-Road Pipes. Material: 304 Stainless Steel. WARNING : This product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer. The item “Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4″ is in sale since Monday, August 20, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “wundercarparts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Australia, Mexico, Germany, Japan, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Greece, Portugal, Cyprus, Slovenia, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Austria, Bahamas, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Gibraltar, Guadeloupe, Iceland, Jordan, Cambodia, Cayman islands, Sri lanka, Luxembourg, Martinique, Maldives, Nicaragua, Oman, Peru, Paraguay, Reunion, Viet nam, Uruguay.
  • Manufacturer Part Number: SHM64HDROR
  • Interchange Part Number: SSW_SHM64HDROR
  • Warranty: Unspecified Length
  • UPC: 00887753436443
  • Brand: Stainless Works

Stainless Works SHM64HDROR Hemi Headers For 05-18 Dodge/Chrysler 5.7 6.1 6.2 6.4

OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint

OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint
OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint
OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint

OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint
OBX Racing Sports offer extensive range of high quality aftermarket automotive products for imports and domestic vehicles. OBX Racing Sports sets and maintain the industry’s high expectations by using applicable highest grade materials and latest machinery along with advanced cutting edge manufacturing technologies. Replace inefficient factory cast log manifold with OBX Racing Sports performance header and increase smoother and better exhaust flow at higher RPM to generate more power and maximize performance out of your engine. High Performance Racing Header 2pcs. Toyota Corolla AE86 4A-GE 20V. Primary Tube : 1.6 OD. Piping : 2.5 OD. Runner Wall Thickness : 16 Gauge (1.5mm). Made Of Stainless Steel. Improve performance, efficiency, and horsepower. CNC-machined flange for precision fitment. Mandrel bent for fast smoother exhaust flow. Welded construction for stronger hold. Individual ports for continuous even exhaust flow. Accessories on photo are included. No installation instruction included in this kit, recommend professional installation. Product is intended to be install to the original stock exhaust setup, any modification or upgrade to the setup may cause fitment issues. Please arrange for someone to sign for the package(s). The merchandise must be unused, in the original packaging and in resalable condition. Any labor charges incurred for installation of products are non refundable. Some product(s) are for off-road or show car purposes only, may not be suitable for regular driving condition. These product(s) doesn’t carry DOT, SAE or CARB approval. Our company is not responsible for any misuse of the the product. OBX Racing Sports and the parts contained herein are not sponsored, affiliated, associated, licensed nor authorized or otherwise connected in any way with America Honda Motor Corporation, Inc the original equipment manufacturers shown on this page/website. Not legal for sale in California!!! For off-road, competition/racing use only. This product is not intended to be installed on vehicles registered for highway use. LEGAL IN CALIFORNIA ONLY FOR RACING VEHICLES THAT MAY NEVER BE USED, OR REGISTERED OR LICENSED FOR USE, UPON A HIGHWAY. All United States Military Bases, AA, AE, AP. The item “OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint” is in sale since Tuesday, October 17, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Exhaust Manifolds & Headers”. The seller is “allmotorsports11″ and is located in Fremont, California. This item can be shipped worldwide.
  • Certification: No
  • Interchange Part Number: JBA Hooker Borla Stainless Works Corsa Kooks
  • Material: Stainless Steel
  • Surface Finish: Mirror Polished Stainless Steel
  • Manufacturer Part Number: 10-2803-6S
  • Placement on Vehicle: Front
  • Brand: OBX Racing Sports
  • Restricted States: California
  • Warranty: Yes

OBX Stainless Steel Header For Toyota Corolla AE86 4A-GE 20V 4-2-1 Slip-Joint

Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60

Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60
Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60
Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60
Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60
Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60

Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60
Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18″ x 60″. This work table features a durable stainless steel top shelf to ensure a long service life in your business. It’s perfect for a variety of tasks, making it extremely versatile. Its undershelf offers a convenient storage solution, so you can keep everything you need close at hand for a streamlined operation. This Regency commercial work table features a durable 18-gauge type 304 stainless steel top shelf that can support up to 700 lb. Type 304 stainless steel offers greater corrosion resistance than type 430 stainless steel options, making it the ideal choice for your kitchen. 18-gauge type 304 stainless steel top offers greater durability and corrosion-resistance than type 430. Galvanized steel undershelf and legs. Aluminum corner brackets on undershelf. Top shelf weight capacity; 520 lb. Adjustable plastic bullet feet. THANK YOU FOR YOUR BUSINESS! The item “Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60″ is in sale since Friday, May 17, 2019. This item is in the category “Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Food Preparation Equipment\Prep Tables\Work Tables”. The seller is “onlinechefstore” and is located in Multiple Locations. This item can be shipped to United States.
  • Gauge: 18 Gauge
  • Leg Construction: Galvanized Steel
  • Tabletop Material: Stainless
  • NSF Listed: Yes
  • Number of Legs: 4
  • Model: 600T1860G
  • Modified Item: No
  • Custom Bundle: No
  • Size: 18″ x 60″
  • Stainless Steel Type: Type 304
  • Top Capacity: 700 lb.
  • Undershelf: Yes
  • Undershelf Capacity: 520 lb.
  • Undershelf Construction: Galvanized Steel
  • Usage: Light Duty
  • MPN: 600T1860G
  • Brand: Regency
  • Length: 60 Inches
  • Width: 18 Inches
  • Height: 34 Inches
  • Backsplash Height: Without Backsplash
  • Backsplash: No
  • UPC: Does not apply

Stainless Steel Work Prep Shelf Table Commercial Restaurant 18 Gauge 18 x 60

30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF

30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF
30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF
30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF
30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF
30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF

30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF
30″ x 36″ Stainless Steel Work Prep Table Undershelf Restaurant Backsplash. If you are looking for a work table that will support the needs of your business without breaking the bank, look no further than this Steelton 18 gauge economy 430 stainless steel work table with an undershelf! This table is made to perform the basic tasks of a work table like offering you a place to prepare fruits and vegetables, open cans, mix ingredients, and plate meals but without the initial cost of a heavier gauge table. And since it has an upturn in the back it keeps items from sliding off the table. Made of 18 gauge, type 430 stainless steel. Galvanized steel legs and undershelf. Ideal for lower volume kitchens and startups. Rolled front edge with 2 rear upturn. THANK YOU FOR YOUR BUSINESS! The item “30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF” is in sale since Wednesday, May 15, 2019. This item is in the category “Business & Industrial\Restaurant & Food Service\Commercial Kitchen Equipment\Food Preparation Equipment\Prep Tables\Work Tables”. The seller is “onlinechefstore” and is located in Multiple Locations. This item can be shipped to United States.
  • Backsplash: Yes
  • Gauge: 18 Gauge
  • Leg Construction: Galvanized Steel
  • Model: Does Not Apply
  • Modified Item: No
  • Custom Bundle: No
  • NSF Listed: Yes
  • Number of Legs: 4
  • Size: 30″ x 36″
  • Stainless Steel Type: Type 430
  • Tabletop Material: Stainless Steel
  • Top Capacity: 595 lb.
  • Undershelf: Yes
  • Undershelf Capacity: 363 lb.
  • Undershelf Construction: Galvanized Steel
  • Usage: Light Duty
  • MPN: Does Not Apply
  • Length: 36 Inches
  • Width: 30 Inches
  • Height: 36 Inches
  • Backsplash Height: 2 Inches
  • Work Surface Height: 34 Inches
  • Brand: Steelton
  • UPC: Does not apply

30 x 36 Stainless Steel Work Prep Table Undershelf Restaurant Backsplash NSF